How to Replace Rv Awning Fabric

how-to-replace-camper-awning

To replace RV awning fabric, remove the old fabric by loosening screws, sliding out the fabric, and rethreading the new fabric. Then, replace the screws.

We’ll guide you through the process of replacing your RV awning fabric step-by-step. Whether your awning is torn, faded, or simply needs an update, replacing the fabric can give your RV a fresh new look. With the right tools and some patience, you can easily replace your RV awning fabric and enjoy the shade and protection it provides on your next outdoor adventure.

So, let’s get started!

Preparing The Rv Awning

Learn how to easily replace your RV awning fabric with this step-by-step guide. Keep your awning in top shape for your next adventure.

Cleaning the awning fabric:

  • Start by removing any loose debris, such as leaves or dirt, from the awning fabric.
  • Mix a solution of mild soap and warm water in a bucket.
  • Gently scrub the awning fabric using a soft brush or sponge, ensuring that you clean both sides thoroughly.
  • Rinse off the soap with clean water, making sure to remove all the residue.
  • Allow the fabric to dry completely before moving on to the next step.

Inspecting the awning hardware:

  • Carefully examine the awning hardware, including the arms, brackets, and roller tube, for any signs of damage or wear.
  • Check for any loose or missing screws and tighten or replace as necessary.
  • Ensure that all moving parts, such as the retracting mechanism, are functioning properly.
  • Pay close attention to any signs of rust or corrosion, which may require further maintenance or replacement.

Gathering necessary tools and materials:

  • Before beginning the awning fabric replacement, gather the following tools and materials:
  • New awning fabric
  • Phillips head screwdriver
  • Pliers
  • Tape measure
  • Utility knife
  • Extra set of hands (optional, but helpful for larger awnings)

Now that you have cleaned the awning fabric, inspected the awning hardware, and gathered all the necessary tools and materials, you are ready to proceed with replacing the RV awning fabric.

Removing The Old Awning Fabric

Replacing RV awning fabric? Learn how to remove the old fabric efficiently with our step-by-step guide. Ensure a smooth replacement process for a fresh and updated look for your RV.

Unrolling The Awning Completely:

Start by unrolling the entire awning so that the fabric is fully extended. This will make the removal process easier and more manageable.

Identifying the roller tube and awning rail:

  • Locate the roller tube, which is the cylindrical tube that the awning fabric rolls up onto. It is usually found on the front end of the awning.
  • Find the awning rail, which is the track that the fabric slides into when the awning is extended. The rail is typically attached to the side of the RV.

Loosening and removing the fabric attachment screws:

  • Locate the fabric attachment screws that secure the awning fabric to the roller tube. These screws are usually found on the bottom side of the roller tube.
  • Use a screwdriver to loosen and remove the fabric attachment screws. Be sure to keep track of these screws as you will need them when installing the new awning fabric.

Sliding the awning fabric out of the roller tube:

  • Slowly slide the awning fabric out of the roller tube by gently pulling it towards you. Take care not to damage the fabric or the roller tube during this process.
  • Continue sliding the fabric out until it is completely separated from the roller tube. Make sure to keep the fabric straight and free from any twists or tangles.

Now that you have successfully removed the old awning fabric, you are one step closer to replacing it with new fabric. Stay tuned for the next section on how to install the new awning fabric.

Installing The New Awning Fabric

Discover how to easily replace the fabric on your RV awning with these simple steps. Get your outdoor space looking fresh and functional in no time.

Prepping The New Fabric For Installation:

  • Before installing the new RV awning fabric, it’s important to prepare it properly. Follow these steps to ensure a smooth installation:
  • Lay out the new fabric on a clean and flat surface, such as a patio or driveway.
  • Remove any packaging material or protective covers from the fabric.
  • Make sure to measure and cut the fabric to the appropriate size, following the manufacturer’s instructions.
  • Ensure that the edges of the fabric are straight and even, trimming any excess if necessary.
  • Double-check that all the necessary hardware, such as grommets or reinforcement patches, are in place.

Inserting The Fabric Into The Roller Tube:

Once the new fabric is prepped, it’s time to insert it into the roller tube. Follow these steps to insert the fabric correctly:

  • Begin by extending the roller tube fully, either manually or using an awning rod.
  • Locate the small gap or slot on the roller tube where the fabric will be inserted.
  • Starting from one end, carefully feed the fabric into the slot, making sure it is evenly distributed along the length of the roller tube.
  • Continue feeding the fabric until it reaches the other end of the tube, ensuring that it remains straight and taut.

Aligning The Fabric With The Awning Rail:

After inserting the fabric into the roller tube, the next step is to align it with the awning rail. Follow these steps to achieve proper alignment:

  • With the help of a second person, position the awning arms in the fully extended position to create tension in the fabric.
  • Gradually extend the fabric out of the roller tube, guiding it along the awning rail.
  • Check that the fabric is centered and aligned properly within the rail, ensuring equal tension on both sides.
  • Make any necessary adjustments to ensure the fabric is straight and not sagging or bunching up.

Securing The Fabric Attachment Screws:

To complete the installation, secure the fabric attachment screws. Follow these steps for a secure and sturdy attachment:

  • Locate the fabric attachment screws on the awning arms or roller tube. These screws are used to hold the fabric in place.
  • Carefully insert the screws through the grommets or attachment holes on the fabric and into the corresponding holes on the awning arms or roller tube.
  • Tighten the screws snugly but avoid over-tightening, as this could damage the fabric or hardware.
  • Work your way along the fabric, securing each attachment point to ensure a secure fit.

Remember, following these steps will help you successfully install your new RV awning fabric. Take your time, pay attention to detail, and seek professional help if needed. Enjoy the improved look and functionality of your awning!

Adjusting And Testing The Awning

Replace your RV awning fabric effortlessly with this step-by-step guide on adjusting and testing the awning. Keep your RV in optimal condition for your next adventure.

After successfully replacing the fabric of your RV awning, the next crucial step is to adjust and test the awning to ensure proper functionality. By following these steps, you can guarantee a smooth and trouble-free operation:

Rolling The Awning Back Up:

  • Slowly roll the awning back up using the retracting mechanism.
  • Make sure that the fabric is evenly and tightly rolled to prevent any sagging or wrinkling.
  • Inspect the movement of the awning to ensure it retracts smoothly without getting stuck.

Verifying Proper Alignment And Tension:

  • Check that the fabric is correctly aligned with the awning’s frame by examining the edges and the position of the fabric in relation to the arms.
  • Ensure that the tension on the fabric is evenly distributed by double-checking that there are no loose or overly tightened areas.
  • Confirm that the fabric is taut and properly stretched across the entire length of the awning.

Testing The Functionality Of The Awning:

  • Extend the awning fully and observe its movement to validate that it opens smoothly and without resistance.
  • Verify that the fabric unwinds evenly and does not bunch up or twist during the extension.
  • Take note of any unusual sounds, vibrations, or jerking movements that could indicate potential issues.

Making Any Necessary Adjustments:

  • If the alignment or tension is not correct, make the necessary adjustments to ensure optimal operation.
  • Loosen or tighten the awning arms, keeping in mind that proper tension is crucial for the awning’s stability.
  • Align the fabric by adjusting the position of the arms or the fabric itself.

Remember, adjusting and testing the awning is essential to prevent any potential issues or malfunctions in the future. By following these steps, you can ensure that your RV awning operates smoothly and provides the desired shade and protection during your outdoor adventures.

https://www.youtube.com/watch?v=QkajEiVUfUE

 

Credit: roadslesstraveled.us

Frequently Asked Questions For How To Replace Rv Awning Fabric

Can You Replace The Fabric On An Rv Awning?

Yes, it is possible to replace the fabric on an RV awning.

Can You Replace Awning Fabric Yourself?

Yes, you can replace your awning fabric yourself. Just follow these simple steps.

How Much Does It Cost To Replace Rv Awning Fabric?

The cost to replace RV awning fabric varies, but typically ranges from $300 to $700.

What Is The Best Rv Awning Replacement Fabric?

The best RV awning replacement fabric is the one that offers durability, UV protection, and easy installation.

Conclusion

Replacing the fabric on your RV awning is a task that can seem intimidating at first, but with the right tools and guidance, it can be a straightforward process. By following the steps outlined in this blog post, you can save yourself the time and money it would cost to hire a professional to do the job.

Remember to thoroughly clean and inspect your awning before beginning, and to take accurate measurements to ensure you purchase the correct fabric size. By removing the old fabric carefully and installing the new fabric properly, you can extend the life of your awning and ensure it continues to provide shade and protection for years to come.

With a little patience and attention to detail, you’ll have your RV awning looking and functioning like new in no time.

Facebook
Twitter
LinkedIn
Telegram

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
flower_vector.png
star_vector.png